PUBLICATIONS

International and National Journals

  1. Anna Lakshmi and A, Valluvan, KR, 2012, ‘A Survey of Algorithms for Defending MANETs against the DDoS Attacks’, International Journal of Advanced research in Computer Science & Software Engineering, Vol. 2, pp. 155-164. 
  2. Anna Lakshmi, A, Valluvan, KR and Naveen, N, 2012, ‘A Cogitate study of IDS in MANET’, International Journal of Computer Science and Information Technology & Security.
  3. Anna Lakshmi, A, Anandakumar, S, Nagaraj, G and Valluvan, KR, 2014, ‘Comparative Analysis of Architectures for Intrusion Detection Systems against DoS Attacks in MANETs based on Chi-Square Test’, International Journal of Computer Applications, Vol. 4, , pp. 27-33. 
  4. Anna Lakshmi A and Valluvan, KR, 2015, ‘ Support Vector Machine And Fuzzy Based Intrusion Detection And Prevention For Attacks In Manets’, International Journal of Mobile Network Design and Innovation s, Vol. 6, pp. 63-72.
  5. Anna Lakshmi, A and Valluvan, KR, 2015, ” Cluster based Secure Group Communication Model for MANET”, International Journal of Applied Engineering Research, Vol. 10, pp. 6820-6831. 
  6. Anna Lakshmi, A and Valluvan, KR, 2016, ‘Certificate Based Secure Communication Scheme for Cluster Based Architecture in MANET’, International Journal of Printing, Packaging & Allied Sciences, Vol. 4, pp. 2386-2397.
  7. Anna Lakshmi, A, Suganthi, M, Jeeva, R and David, DG, 2022, ‘A Novel Technique For Random Number Generation Using CMOS Image Sensor’, AIP CP, Vol. 2444.
  8. Ebenezer, AV, Arulazhagan, P, Rajesh Banu, J, Adish Kumar, S, 2013, ‘Coupled ozonation with aerobic sequential batch reactor for treatment of distillery wastewater’, Int.J.Curr.Microbiol.App.Sci (2013) 2(6): 137-145.
  9. Poornima Devi, T, Ebenezer, AV, Adish Kumar, S, Kaliappan, S & Rajesh Banu, J 2014, ‘Effect of deflocculation on the efficiency of disperser induced dairy waste activated sludge disintegration and treatment cost’, Bioresour. Technol., vol. 167, pp. 151-158.
  10. Ebenezer, AV, Arulazhagan, P, Adish Kumar, S, Yeom, I & Rajesh Banu, J 2014, ‘Effect of deflocculation on the efficiency of low-energy microwave pretreatment and anaerobic biodegradation of waste activated sludge’, Applied Energy, vol. 145, pp. 104-110.
  11. Ebenezer, AV, Kaliappan, S, Adish Kumar, S, Yeom, I & Rajesh Banu, J 2015, ‘Influence of deflocculation on microwave disintegration and anaerobic biodegradability of waste activated sludge’, Bioresour. Technol., vol. 185, pp. 194-201.
  12. S Balaji, R Jeeva, Perumal M Ayyam, P Mano, “ESCORTING DATA FROM CCA2 ATTACK ON SAC”, International Journal on Information Sciences and Computing, Vol. 5, Issue 2, 2011.
  13. R Jeeva, M AyyamPerumal, Integration of RMAC with Hybrid Routing Algorithms in MANETS, CiiT Wireless Communication, Vol. 4, Issue 13, pp. 731-736, 2012.
  14. R Jeeva, “Extended BATMAN-A Novel Approach with Node Stability for Reliable Transmission in MANETS”, CiiT Networking and Communication Engineering, Vol. 4, Issue 14, pp. 837-841.
  15. Jeeva, R; N, Muthukumaran, “IDENTIFICATION OF FAKE MESSAGES IN SOCIAL NETWORK USING E-HITS AND NEWSAPI”, International Journal of Innovative Technology and Exploring Engineering, Vol. 9, Issue 10, pp. 7-11, 2020.
  16. R Jeeva, “Detection of False Ranking Apps Using Level Aggregation”, Turkish Journal of Computer and Mathematics Education, Vol. 12, Issue 13, pp. 2235-2242, 2021.
  17. Arunachalam, I. Sorimuthu, V. Rajagopal and B. Sankaragomathi, “Automatic Fast VideoObject Detection and Tracking on Video Surveillance System” ICTACT Journal on Image andVideo Processing, Volume: 03, Issue: 01,pp . 479 -484, August 2012.
  18. VedhaPriyavadhana, G. ShanmugaPriya, N. Renee Reddiar, M. Mano Priya ,“Effective videoSaliency Mapping for Object detection using deep learning neural networks”,InternationalJournal of Recent Technology and Engineering (IJRTE) ,ISSN: 2277-3878, Volume-8 Issue-6,2020.
  19. ShanmugaPriya, R. VedhaPriyavadhana, M. Mano Priya, N. Renee Reddiar, “Analysis Of Video Saliency Mapping For Object Detection Using Deep Learning RBFNN Networks”, Journal of Interdisciplinary Cycle Research (JICR),Volume XII, Issue III, ISSN NO: 0022-1945,July 2020.
  20. Renee SegridReddiar, L.R. Priya, G.ShanmugaPriya, “Power Allocation and Gabor filter based multi user MIMO systems using Secure LED Communication for Non-Orthogonal access”, Journal of Interdisciplinary Cycle Research (JICR), Volume XII, Issue III, ISSN NO: 0022-1945, July 2020.
  21. Mano Priya, G. ShanmugaPriya, J. Friska, “Performance Comparison of deep learning classifiers for diabetic Retinopathy Identification”, Journal of Interdisciplinary Cycle Research (JICR),Volume XII, Issue III,ISSN NO: 0022-1945, July 2020.
  22. Sulochana, S., (2019), Design Specific Path Delay Testing in Look up table based FPGA’s”, “International journal for Scientific and Advanced Research in Technology”, 5(3),2395-1052.
  23. Sulochana, S., (2019) “Generation of Power using Piezoelectric and heat sensor”, “International journal of Current Engineering & Scientific Research”, 6(1),2394-0697.
  24. Sulochana, S., Beula, S., (2016),”VLSI Implementation of ADC Using Aliasing Free Pulse Width Modulation”, “lJRSl”, 3(4),103-107.
  25. Aswathy, B.S., Sheeba, A., Sulochana, S., Beula, S., (2015), “Automatic Anatomical Segmentation Techniques In 3D MRI Brain Segmentation Evaluation Based on Modified Fuzzy Clustering Method”,”IJAER”,10(4),8487-8498.
  26. Sulochana, S., Senthi Siva Manikandan, S., (2014), “Reduction of musical noise by Weiner Post processing method”, “USER”, 5(1),2182-2186.
  27. Suganthi, M., Akila, C., 2020, ‘Recent Advances In Color Image De-Hazing Using Structural And Statistical Features’, Adalya Journal, Volume 9, Issue 2.
  28. Suganthi, M., Akila, C., 2021, ‘Single Color Image De-Hazing Using Dark Channel Prior’, has been published in IJARSCT, Volume 2, and Issue 3.
  29. Suganthi, M., Akila, C., 2021, ‘Efficient And Recent Advances For Face Spoofing Detection Using Convolutional Neural Network Based Feature Extraction’, Joural of Information and Computational Science, Vol 14, Issue 2.
  30. Suganthi, M., Akila, C., 2021, ‘Color Image Finding Mask by Copy Move Forgery Detection’, IJARSE, Vol 10, Issue 6.
  31. Sam Appadurai, A., Kannan, S. U., Samuel Prabaharan, J., Raja, M.A., 2018, “Experimental Study on Partial Replacement of Fine Aggregate by Using Foundry Sand and glass powder” International Journal of Management, IT & Engineering Vol. 8 Issue 7(1),  ISSN: 2249-0558 pp. 138 – 143.
  32. Raja. M. A., Rajalakshmi, S.,Valliappan. S., Dhivya. K. S., 2017, “Utilisation of Granulated Marble InGeopolymer Concrete” International Research Journal of Engineering and Technology (IRJET) Volume: 04 Issue: 12, e-ISSN: 2395-0056 pp. 1705-1708.
  33. Rajamuniasamy, S., Mercy, S., Raja, M. A., Praveen, 2018, “An Experimental Study on Concrete Strength and Corrosion Activity by Replacing Potable Water by Sea Water” International Journal of Science and Research Volume 7 Issue 12, ISSN: 2319-7064 pp. 1296 – 1299.
  34.  Raja M.A, Sophia M., 2019,“Influence of Expansive Agent on the Dimensional Stability and Mechanical Properties of Gypsum Plaster” International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-4, pp. 928 – 931.
  35. Selvakumar, S, Rajasekaran, TR, Sabarinathan, V & Jeba Rajasekhar, RV, 2021, ‘Thermal characteristics of solar collector with improved absorber configurations’, Design Engineering (Toronto), vol. 2021, no. 8, pp. 12849-12855, ISSN : 0011-9342. IF – 1.41., UGC Care List (Scopus Indexed).
  36. Selvakumar, S, Rajasekaran, TR, Sabarinathan, V &Jeba Rajasekhar, RV, 2021, ‘Experimentation on effective materials for photo thermal applications’, Annals of the Romanian Society for Cell Biology, vol. 25, no. 6, pp. 17775-17780, ISSN : 1583-6258.
  37. Selvakumar, S, Rajasekaran, TR, Sabarinathan, V, Jeyakumaran, T & Jeba Rajasekhar, RV 2021, ‘Fabrication and characterization of nano structured honeycomb absorbers and thermal analyses on solar air heating collector’, Turkish Journal of Computer and Mathematics Education’, vol. 12, no. 6, pp. 383-391, ISSN : 1309-4653.
  38. Selvakumar, S, Rajasekaran, TR, Sabarinathan, V & Jeba Rajasekhar, RV, 2020, ‘Experimental study on the performance of solar collector with nano sized materials’, Journal of Advanced Scientific Research, vol. 11, no. 1, pp. 187-190, ISSN : 0976-9595.
  39. Selvakumar, S, Rajasekaran, TR, Sabarinathan, V & Jeba Rajasekhar, RV, 2019, ‘Performance characteristics of solar collector with nano structured absorber configurations’, Infokara Research, vol. 8, no. 8, pp. 187-190, ISSN : 1021-9056.
  40. Selvakumar, S, Rajasekaran, TR, Sabarinathan, V & Jeba Rajasekhar, RV, 2019, ‘Thermal analyses on solar collector with heat transfer configurations’, International Journal of Research and Analytical Reviews, vol. 6, no. 2, pp. 53-54, ISSN : 2348-1269.
  41. Selvakumar, S, Rajasekaran, TR, Sabarinathan, V & Jeba Rajasekhar, RV, 2019, ‘Thermal analysis on solar collector for supplementary heating of hot fluid’, International Journal of Research in Advent Technology, vol. 7, no. 4, pp. 56-57.
  42. Selvakumar, S, Rajasekaran, TR, Sabarinathan, V &JebaRajasekhar, RV, 2018, ‘Energy collection efficiency of solar collector with nano carbon-Cr2O3 coated absorber’, International Journal of Scientific Research in Physics and Applied Sciences, vol. 6, no. 6, pp. 127-128, ISSN : 2348-3423.
  43. Lakshmi Narayanan S,  2018, ‘Physical Properties Of High Performance Concrete using Calcium Nitrate and Polypropylene fibre in Marine Sand’, International Research Journal of Engineering and Technology (IRJET) Vol: 5 Issue: 12.
  44. Lakshmi Narayanan, S, 2017, ‘Mechanical Properties of Fibre Reinforced HPC Using             Marine International Journal of Civil      Engineering (ICRTCETM -2017) ISSN: 2348 – 8352, Part-9 SSRG – Special Issue.
  45. Lakshmi Narayanan, S, 2017, Experimental Investigation of Solid Block Made With Quarry Dust and Partially Replacing the Cement by Lime Sludge SSRG International Journal Of Civil Engineering (ICRTC ETM-2017 ISSN: 2348-8352, Part4 (Page no -292-295), Special Issue.
  46. Kalivarathan, G., Patnaik, B., Markos, Atiso, T, A., LolloChandeLollo, and  Muthuganesh, M., “Theoretical Prediction and Modeling of Sustainable Standards for Green Buildings towards Effective Economic Growth through Better Ecological Standards and Building Heat Transfer.” International Journal of Pure and Applied Mathematics, Volume 118 No. 20 2018, 45-49. ISSN: 1314-3395 (on-line version). url: http://www.ijpam.eu-  Special issue
  47. ShanmugaPriya, G., VedhaPriyavadhana,R.., Mano Priya, M., Renee Reddiar, N., “Analysis Of Video Saliency Mapping For Object Detection Using Deep Learning RBFNN Networks”,Journal of Interdisciplinary Cycle Research (JICR),Volume XII,Issue III, ISSN NO: 0022-1945,July 2020.
  48. Mano Priya,M. ShanmugaPriya,G., Friska,J. “Performance Comparison of deep learning classifiers for diabetic Retinopathy Identification”,Journal of Interdisciplinary Cycle Research (JICR),Volume XII,Issue III,ISSN NO: 0022-1945, .
  49. Renee SegridReddiar, N., Priya, L.R., ShanmugaPriya, G., 2020, “Power Allocation and Gabor filter based multi user MIMO systems using Secure LED Communication for Non-Orthogonal access”, Journal of Interdisciplinary Cycle Research (JICR), Volume XII, Issue III, ISSN NO: 0022-1945.
  50. PremAnandh, J., and Ramnath 2015 ‘Dynamic analysis of agent network in self-organisation using service level agreement technique’ Published in International Journal of Engineering and Science InventionVol. 4, Issue 3.
  51. Ramnath, M., Synergetic CRN And ARN 2015 ‘Technique among UAV Connectivity in Wireless Sensor Network’ published in International Journal of Scientific Research and Engineering studies volume 2 Issue 3.
  52. Ramnath M and YesubaiRubhavathi 2021 ‘App Assessment With Three Phase Evidence System Using Sentiment Analysis’ Third International Conference on Intelligent Communication Technologies and Virtual Mobile Networks (ICICV 2021).DVD Part Number: CFP21ONG-DVD, 978-0-7381-1182-7.
  53. Arul Marcel Moshi, A., Ravindran, D., SundaraBharathi, S.R., Padma,  S.R., Indran, S., Divya, D.,2020, “Characterization of natural cellulosic fiber extracted from Grewiadamine flowering plant’s stem”, International Journal of Biological Macromolecules, 164, pp. 1246-1255.
  54. Arul Marcel Moshi, A., Ravindran, D., SundaraBharathi, S.R., Indran, S., SuganyaPriyadharshini, G., 2020, “Characterization of surface-modified natural cellulosic fiber extracted from the root of Ficusreligiosa tree”, International Journal of Biological Macromolecules, 156, pp. 997-1006.
  55. Maharajan, S., Ravindran, D., Rajakarunakaran, S., Gururaj, C., 2020,“Experimental investigation of erosion and corrosion behavior of HVOF sprayed WC + 50% Cr3 C2 composite coatings on sustainable austenitic stainless steel (SS316)”, Journal of Green Engineering.
  56. Moshi, A.A.M., Ravindran, D., SundaraBharathi, S.R., Rex, F.M.T., Kumar, P.R.,2020, “TIG Welding Process Parameter Optimization for Aluminium Alloy 6061 Using Grey Relational Analysis and Regression Equations”, Advances in Intelligent Systems and Computing, 979, pp. 413-425.
  57. Moshi, A.A.M., Ravindran, D., Bharathi, S.R.S., Indran, S., Saravanakumar, S.S., Liu, Y., 2020,“Characterization of a new cellulosic natural fiber extracted from the root of Ficusreligiosa tree”, International Journal of Biological Macromolecules, 142, pp. 212-221.
  58. Arul Marcel Moshi, A., Ravindran, D., SundaraBharathi, S.R., Suganthan, V., KennadyShaju Singh, G., 2019,“Characterization of New Natural Cellulosic Fibers-A Comprehensive Review”, IOP Conference Series: Materials Science and Engineering, 574(1).
  59. SundaraBharathi, S.R., Ravindran, D., Arul Marcel Moshi, A., Rajeshkumar, R., Palanikumar, R.,2019, “Multi objective optimization of CNC turning process parameters with Acrylonitrile Butadiene Styrene material”, Materials Today: Proceedings, 27, pp. 2042-2047.
  60. Maharajan, S., Ravindran, D., Rajakarunakaran, S., Adam Khan, M.,2019, “Analysis of surface properties of tungsten carbide (WC) coating over austenitic stainless steel (SS316) using plasma spray process”, Materials Today: Proceedings, 27, pp. 2463-2468.
  61. Arul Selvan, S., Ravindran, D., Arul Marcel Moshi, A., Prince, D.,2019, “Optimization of surface roughness, material removal rate and taper error for wirecut electrical discharge machined taper parts of inconel 825 alloy”, Journal of the Balkan Tribological Association, 25(4), pp. 1028-1037.
  62. Venkatkumar, D., Ravindran, D.,2019, “Effect of Boundary Conditions on Residual Stresses and Distortion in 316 Stainless Steel Butt Welded Plate”, High Temperature Materials and Processes, 38(2019), pp. 827-836.
  63. Vignesh Kumar, D., Ravindran, D., Lenin, N., Siva Kumar, M.,2019, “Tolerance allocation of complex assembly with nominal dimension selection using Artificial Bee Colony algorithm”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(1), pp. 18-38.
  64. Venkatesan, S., Ravindran, D., “Comprehensive analysis and optimization of wire electric discharge machining of graphite reinforced aluminium metal matrix composite”, Journal of the Balkan Tribological Association, 233(1), pp. 18-38, (2018).
  65. Venkatkumar, D., Ravindran, D., Selvakumar, G.,2018, “Finite Element Analysis of Heat Input Effect on Temperature, Residual Stresses and Distortion in Butt Welded Plates”, Materials Today: Proceedings, 5(2), pp. 8328-8337.
  66. Irullappasamy, S., Ravindran, D.,2018, “Combined effect of nano clay and fibre surface treatment on mechanical behaviours of Palmyra fruit fibre/MMT clay reinforced polyester hybrid composite”, International Journal of Computer Aided Engineering and Technology, 10(1-2), pp. 26-34.
  67. ChenthilJegan, T.M., Ravindran, D.,2017, “Electrochemical machining process parameter optimization using particle swarm optimization”, Computational Intelligence, 33(4), pp. 1019-1037.
  68. Rex, F.M.T., Ravindran, D.,2017, “An integrated approach for optimal fixture layout design”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(7), pp. 1217-1228.
  69. Rajakumar, S., Ravindran, D., Sivakumar, M., Venkatachalam, G., Muthukumar, S., 2017,“Optimization of Power Coefficient of Wind Turbine Using Genetic Algorithm”, Journal of The Institution of Engineers (India): Series C, 98(2), pp. 111-118.
  70. Vignesh Kumar, D., Ravindran, D., Siva Kumar, M., Islam, M.N.,2016, “Optimum tolerance synthesis of simple assemblies with nominal dimension selection using genetic algorithm”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230(19), pp. 3488-3508.
  71. Sankar, I., Ravindran, D.,2016, “Fiber loading and treatment effects on dry sliding wear of Palmyra fruit fiber composites”, Science and Engineering of Composite Materials,23(2), pp. 217-226.
  72. Venkatkumar, D., Ravindran, D.,2016, “3D finite element simulation of temperature distribution, residual stress and distortion on 304 stainless steel plates using GTA welding”, Journal of Mechanical Science and Technology, 30(1), pp. 67-76.
  73. Geetha, K., Ravindran, D., Kumar, M.S., Islam, M.N.,2015, “Concurrent tolerance allocation and scheduling for complex assemblies”, Robotics and Computer-Integrated Manufacturing, 35, pp. 84-95.
  74. ChenthilJegan, T.M., Ravindran, D., Dev Anand, M.,2015, “Process parameter influencing on electrochemical machining: An experimental study”, International Journal of Applied Engineering Research, 10(45 Special Issue), pp. 31905-31911.
  75. ChenthilJegan, T.M., Ravindran, D., Dev Anand, M., 2015, “Intelligent modeling and optimization of ECM process parameters”, Advances in Intelligent Systems and Computing, 324, pp. 533-541.
  76. Raj, J.A., Ravindran, D., Saravanan, M., Prabaharan, T.,2014, “Simultaneous scheduling of machines and tools in multimachine flexible manufacturing systems using artificial immune system algorithm”, International Journal of Computer Integrated Manufacturing, 27(5), pp. 401-414.
  77. Jegan, T.M.C., Ravindran, D., Anand, M.D.,2014, “Material characterization study on aluminium metal matrix composites by enhanced stir casting method”, Advanced Materials Research, 984-985, pp. 326-330.
  78. Rajkumar, S., Ravindran, D., Sharma, R.S., Raghupathy, V.P.,2014, “Evaluation of elastic constants of A3003 honeycomb core with varying hexagonal cell geometries through finite element approach, “Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(10), pp. 1689-1700.
  79. Lenin, N., Kumar, M.S., Ravindran, D., Islam, M.N.,2014, “A tabu search for multi-objective single row facility layout problem”, Journal of Advanced Manufacturing Systems, 13(1), pp. 17-40.
  80. Jegan, T.M.C., Ravindran, D., Anand, M.D., 2013, “ECM parameters modeling and optimization using WSGA”, Applied Mechanics and Materials, 423-426, pp. 925-930.
  81.  Lenin, N., Siva Kumar, M., Islam, M.N., Ravindran, D., 2013, “Multi-objective optimization in single-row layout design using a genetic algorithm”, International Journal of Advanced Manufacturing Technology, 67(5-8), pp. 1777-1790.
  82. Geetha, K., Ravindran, D., Siva Kumar, M., Islam, M.N.,2013, “Multi-objective optimization for optimum tolerance synthesis with process and machine selection using a genetic algorithm”, International Journal of Advanced Manufacturing Technology, 67(9-12), pp. 2439-2457.
  83. Rajakumar, S., Ravindran, D.,2012, “Optimization of Wind Turbine Power Coefficient Parameters using Hybrid Technique”, Journal of The Institution of Engineers (India): Series C, 93(2), pp. 141-149.
  84. Sreenivasan, V.S., Ravindran, D., Manikandan, V., Narayanasamy, R., 2012, “Influence of fibre treatments on mechanical properties of short Sansevieriacylindrica/polyester composites”, Materials and Design, 37, pp. 111-121.
  85. Rajkumar, S., Ravindran, D., Arul Raj, P.K., Hariprasath, V., 2012, “Compression behavior of adhesive butt joints of aluminum hexagonal core sandwich panels with different edging configurations”, Advanced Materials Research, 488-489, pp. 737-741.
  86. Vigraman, T., Ravindran, D., Narayanasamy, R., 2012, “Effect of phase transformation and intermetallic compounds on the microstructure and tensile strength properties of diffusion-bonded joints between Ti-6Al-4V and AISI 304L”, Materials and Design, 36, pp. 714-727.
  87. Vigraman, T., Narayanasamy, R., Ravindran, D., 2012, “Microstructure and mechanical property evaluation of diffusion-bonded joints made between SAE 2205 steel and AISI 1035 steel”, Materials & Design 35, 156-169.
  88. Vigraman, T., Ravindran, D., Narayanasamy, R., 2012, “Diffusion bonding of AISI 304L steel to low-carbon steel with AISI 304L steel interlayer”, Materials and Design, 34, pp. 594-602.
  89. Rajakumar, S., Ravindran, D.,2012, “Iterative approach for optimising coefficient of power, coefficient of lift and drag of wind turbine rotor”, Renewable Energy, 38(1), pp. 83-93.
  90. Jegan, T.M.C., Dev Anand, M., Ravindran, D., 2012, “Determination of electro discharge machining parameters in AISI202 stainless steel using grey Relational Analysis”, Procedia Engineering, 38, pp. 4005-4012.
  91. Kumar, M.S., Islam, M.N., Lenin, N., Vignesh Kumar, D., Ravindran, D.,2011, “A simple heuristic for linear sequencing of machines in layout design”, International Journal of Production Research, 49(22), pp. 6749-6768.
  92. Sreenivasan, V.S., Ravindran, D., Manikandan, V., Narayanasamy, R.,2011, “Mechanical properties of randomly oriented short Sansevieriacylindricafibre/polyester composites”, Materials and Design,32(4), pp. 2444-2455.
  93. Sreenivasan, V.S., Somasundaram, S., Ravindran, D., Manikandan, V., Narayanasamy, R., 2011, “Microstructural, physico-chemical and mechanical characterisation of Sansevieriacylindricafibres – An exploratory investigation”, Materials and Design, 32(1), pp. 453-461.
  94. Manickam, I.N., Ravindran, D., Subramanian, P.,2006, “Biomass densification methods and mechanism”, Cogeneration and Distributed Generation Journal, 21(4), pp. 33-45.
  95. Ravindran, D., Selvakumar, S.J., Sivaraman, R., Haq, A.N., 2005,“Flow shop scheduling with multiple objective of minimizing makespan and total flow time”, International Journal of Advanced Manufacturing Technology, 25(9-10), pp. 1007-1012.
  96. Haq, A.N., Ravindran, D., Aruna, V., Nithiya, S.,2004, “A hybridisation of metaheuristics for flow shop scheduling”, International Journal of Advanced Manufacturing Technology, 24(5-6), pp. 376-380.

 

Book Chapters

  1. Ebenezer, AV, Tamilarasan, K, 2019, ‘Biomass pretreatment for enhancement of biogas production’, in Book “Biogas”, Intech Open, ISBN 978-953-51-6315-2, DOI: 10.5772/intechopen.82088.
  2. Ebenezer, AV, Dinesh Kumar, M, Kavitha, S, Uan, DK and Rajesh Banu, J, 2020, chapter ‘State of the art of food waste management in various countries’ in Book ‘Food Waste to Valuable Resources-Applications and Management’, Elsevier, Paperback ISBN:9780128183533, Chapter 14, pp., 299-323.
  3. Published the paper in BOOK entitled “A survey:fast and recent advances in single color image dehazingusing structural and statistical features based on iqa” in Recent Challenges In Science Engineering And Technology.

Conferences

  1. Anna Lakshmi, A., presented a paper entitled Probabilistic approach to locate a Mobile node in a wireless domain,ETIC 2007, 7.9.2007.
  2. Anna Lakshmi, A.,Sasirekha, S., Identification of Mobile node in a wireless domain,NCRTAC’07, 5.10.2007.
  3. Anna Lakshmi, A., A Natural Language Based Interface for Querying a Video Database,NCCT’09, 2009.
  4. Anna Lakshmi, A.,Valluvan, K. R., Comparative Analysis of Performance forGeneralized Intrusion Detection Systems and Fuzzy based Intrusion Detection Systemin MANET, 2013.
  5. Naveen, N., Anna Lakshmi, A.,  Trust node valuation and path reliability technique forintrusion detection in MANET, Pattern Recognition, Informatics and MobileEngineering, 21.2.2013.
  6. Anna Lakshmi,A., presented a paper entitled “Advanced Anti-Spam filter”, 2011.
  7. Anna Lakshmi, A., Valluvan, K. R., Defending MANETs against DoS attack byeffective Intrusion Detection System, ICACT2013, 9.3.2013.
  8. Elakkiya, S., Anna Lakshmi, A., “Secure Data Transfer Using MAES Algorithm in Cloud”,ICETAC 2020, 6.3.2020.
  9. Ivin, S, Ebenezer, AV, Banu, JR, 2015, ‘An investigation on sludge reduction potential of sonic pretreatment simulated by advanced oxidation process using Fenton reagent’, NCMTC-15, pp. 20 – 26.
  10. Vinoth, K, Ebenezer, AV, Banu, JR, 2015, ‘Effect of disperser induced deflocculation on microwave disintegration of waste activated sludge for biofuel production’, NCMTC-15, pp. 61 – 66.
  11. Ebenezer, AV., 2006, presented a paper entitled “Impact of Environmental pollution” in the National Seminar conducted by the Department of Economics, St. Mary’s College, Thoothukudi.
  12. Durga Devi,presented a paper entitled “Extraction of dark image pixel from CMOS image sensor for random number generation”, International Conference on Innovation and Technological Developments in Electronics, Computers and Communication, organized by SRM Institute of Science and Technology, Chennai, 17th and 18th May 2021.
  13. Durga Devi, presented a paper entitled “ Blockchain for IOT Security and Privacy: A survey”, International Conference on Recent Innovations in Engineering, Technology, Management and Science, organized by PSN Engineering College, Tirunelveli on 24th and 25th March 2022.
  14. Durga Devi,presented a paper entitled “Android based vehicle alert system for incoming sharp corners and accident prone zones via GPA Assistance”, International Conference on Recent Trends in Materials, Renewable Energy, Information & Communication Technologies, organized by PSN Institute of Technology and Science, Tirunelveli on 28th and 29th April 2022.
  15. Kavitha, V; Balaji, S; Jeeva, R, “RMAC—A new encryption scheme for Arithmetic Coding to evade CCAattacks”, 2011 Third International Conference on Advanced Computing, pp. 175-180, 2011.
  16. S Balaji, R Jeeva, “XRMAC-an extended RMAC scheme to evade hacking by dynamic sizing”, 2013 FifthInternational Conference on Advanced Computing (ICoAC), pp. 158-163, 2013.
  17. R Jeeva, M Ayyam Perumal, “DMAC-An Integrated Encryption Scheme with RSA for AC to ObstructInference Attacks”, Proceedings of the International Conference on Applied Mathematics and TheoreticalComputer Science, 2013.
  18. R Jeeva, “Incorporating DMAC with Extended ZRP for Optimal and Secure Transmission”, InternationalConference on Emerging Technologies in Engineering, 2013.
  19. R Jeeva, “Sentimental Analysis on Deep Convolutional Neural Networks”, International Conference onEmerging Trends in Applications, 2020.
  20. R Jeeva, “Integrated Level Aggregation Method for the Identification of Apps in Top Charts”,International Conference on Research and Development in Science, Engineering and Technology, 2021.
  21. R Jeeva, “Sentimental Analysis on Artificial Neural Networks”, International Conference on EmergingTrends in Engineering and Management, 2021.
  22. R Jeeva, “Extraction of Dark Image Pixel from CMOS Image Sensor for Random Number Generation”,International Conference on Innovation and Technological Developments in Electronics, Computer andCommunication, 2021.
  23. R Jeeva, “Evidence Level Aggregation Technique for Apps in Top Results”, International Conference onAdvanced Computing and Communication Technology, 2021.
  24. R Jeeva, E Mahalakshmi, S Aruna and S Daciy rani, “Integrating Schemes for Detecting Rank Deviationsusing CNN”, International Conference on Recent Trends in Materials, Renewable Energy, Information andCommunication Technologies, 2022.
  25. R Jeeva, K. Sathya Priya, M. Ramya and S. Dayana, “A Multilevel Aggregation Technique for Apps inTop Results using CNN”, International Conference on Recent Innovations in Engineering,Technology,Management and Science, 2022.
  26. Selvakumar, S., presented a paper entitled ‘Experimental analysis of thermal energy toperform solar collector using a MATLAB prediction’ in the International Conferenceon „Functional Materials for Energy, Environment and Biomedical Applications‟ atBishop Heber College, Tiruchirapalli on 04-06, May, 2022.
  27. Selvakumar, S., presented a paper entitled ‘Sugarcane baggasse based activated carbon usingin air pollutants control’ in the National level virtual Conference on AdvancedTechnologies in Waste Water Treatment‟ at Karpagam Academy of Higher Education,Coimbatore on 05th May, 2022.
  28. Selvakumar, S.,presented a paper entitled ‘Thermal study on solar collector, solar absorber usingnano materials : An experimental study’ in the International Conference on „Recent Trends inRenewable Energy and its Applications‟ at Idhaya College for Women, Sivagangai on 22ndApril, 2022.
  29. Selvakumar, S.,presented a paper entitled ‘Nano structured materials using in solar air heatingcollector’ in the International Conference on „Emerging Materials and its Applications‟ atSt.Xavier‟s College, Palayamkottai on 01st March, 2022.
  30. Selvakumar, S.,presented a paper entitled ‘Design and performance of solar air heating collectorusing nanosized materials’ in the International Conference on „Current Trends in MaterialScience & Technology at Nehru Institute of Technology, Coimbatore on 26th July, 2021.
  31. Selvakumar, S.,presented a paper entitled‘Enhancing the thermal performance of solar collectorusing nano structured materials’ in the National Conference on “Innovations in Science andTechnology‟ at Sri Venkateswara College of Engineering and Technology, Chittoor on 08-09,July, 2021.
  32. Selvakumar, S.,presented a paper entitled ‘Improving thermal performance of solar collector usingnano structured absorber’ in the Three days International Conference onSustainable Materialsand Technologies for Bio and Energy Applications’ at SSN College of Engineering, Chennai on19-21, May, 2021.
  33. Selvakumar, S.,presented a paper entitled ‘Optimization of the nano materials based cost effectivewith improved solar absorber configurations’ in the Two days Indo-Korea virtual Conferenceon Development of Advanced Materials for Future Technologies’ at KAIST,Daejeon, SouthKorea and Vellore Institute of Technology, Chennai on 14th and 15th of May, 2021.
  34. Selvakumar, S.,presented a paper entitled ‘Preparation and characterization of activated carbon fromSugarcane bagasse and zinc oxide in absorptive coatings and theoretical prediction ofthermalperformance of solar collectors ’ in the Two days National Conference on AdvancedFunctional Molecules and Materials’ at Karunya Deemed University, Coimbatore on 12th and13th of March, 2021.
  35. Selvakumar, S., presented a paper entitled ‘Thermal characteristics of solar collector with improvedabsorber configurations’ in the Three days International Conference on „Novel Materials forBiomedical, Energy, Environment, Sensing and other Applications’ at National Institute ofTechnology, Trichy on March 11-13, 2021.
  36. Selvakumar, S.,presented a paper entitled ‘Efficiency improvement of solar collector using nanostructured absorbers’ in the Two days National E-Conference on “Advance Research inMaterials Science’ at Kamaraj College, Thoothukudi on 22nd& 23rd of February, 2021.(Bestpresentation award-First prize).
  37. Selvakumar, S.,presented a paper entitled ‘Optimization of composition of nano-sized carbon andaluminium oxide in absorptive coatings and theoretical prediction of thermal performance of solar collectors’ in the Two days National Seminar on ‘Emerging Trends in Physics’ at SadakathullahAppa College (Autonomous), Tirunelveli on 28th& 29 th of February, 2020.
  38. Selvakumar, S., presented a paper entitled ‘Performance evaluation of solar air heating collector with nano carbon-TiO2 coated absorber configurations’ in the National Conference on ‘Functional Materials’ at Noorul Islam centre for Higher education, Thuckalay on 24th February, 2020.
  39. Selvakumar, S., presented a paper entitled ‘Emerging solar materials and their applications in Photo thermal devices’ in the National Conference on ‘Design and Applications of EmergingMaterials’ at S.VellaichamyNadar College on 19th February, 2020.
  40. Selvakumar, S.,presented a paper entitled ‘Experimentation on Effective Materials for PhotoThermal Applications’ in the National Conference on ‘Recent Developments in EffectiveMaterials’ at Sarah Tucker College (Autonomous), Palayamkottai on 7th February, 2020. (Bestpresentation award-First prize).
  41. Selvakumar, S.,presented a paper entitled ‘Nano structured absorber: preparation, characterizationand its contribution to thermal performance of solar collector’ in the International conferenceon ‘Recent Advancements in Material Science’ at The New College (Autonomous),Chennai on21stJanuary, 2020.
  42. Selvakumar, S.,presented a paper entitled ‘Experimental Study on the Performance of Solar collectorwith nano sized materials’ in the International Conference on ‘Advanced Materials’ at AditanarCollege of Arts and Science on 26th August, 2019.
  43. Selvakumar, S.,presented a paper entitled’Thermal Analyses on solar collector with heat transferconfigurations’ in the International conference on ‘Emerging Trends in Science,Technology andMathematics’ at Parvathy‟s Arts and Science College on 22nd August, 2019.
  44. Selvakumar, S.,presented a paper entitled ‘Nano-sized carbon and metal oxide coated solarabsorbers: preparation, characterization and efficacy evaluation’in the ‘Internationalconference on Energy Materials’ at Mother Teresa Women’s University, Kodaikanal on 9thJanuary, 2019.
  45. Selvakumar, S.,presented a paper entitled ‘Performance Charcteristics of Solar collector withNano-structured absorber configurations’ on International conference on Emerging Trendsand challenges-2018 (ICETC‟18) at NPR Arts and Science college,Natham, Dindigul on 28thDecember,2018.
  46. Selvakumar, S.,presented a paper entitled‘Assessment of thermal characteristics of solar collectorswith variations in materials of absorbers’on Advancement and Innovation in Material Research(CAIM-2018) at P.G&Research Department of Physics,Govt. Arts College,Madurai on 23rdOctober,2018.
  47. Selvakumar, S.,presented a paper entitled ‘Experimental estimation of energy collection, extraction & utilization performance of flat plate collector hot water systems ’National seminar on “Solar energy conversion with Nano particles” held at Amman college of Arts and science, Dindigul on February 9th 2013.
  48. Selvakumar, S.,presented a paper entitled ‘Solar Hot Water systems’ National seminar on “Treasure Troves in physics” held at PVP College, Singarakottai, Dindigul on 22ndJanuary 2013.
  49. Selvakumar, S., presented a paper entitled ‘Solar cooking systems’ National conference on “Energy conservation and Renewable energy technology” held at VHNSN College, Virudhunagar during 26-27 August 2011.
  50. Selvakumar, S.,presented a paper entitled ‘Radiation and Environmental physics’ held at women‟s Christian college, Nagercoil, (SAPP-2010).
  51. Navaneetha Selvan, S,presented a paper entitled ‘Experimental analysis of thermal energy to perform solarcollector using a MATLAB prediction’ in the International Conference on ‘Functional Materials forEnergy, Environment and Bio medical Applications at Bishop Heber College, Tiruchirapalli on04-06, May, 2022.
  52. Navaneetha Selvan, S,presented a paper entitled‘Sugarcane baggasse based activated carbon using in airpollutants control’ in the National level virtual Conference on ‘Advanced Technologies in WasteWater Treatment’ at Karpagam Academy of Higher Education, Coimbatore on 05th May, 2022.
  53. Rajakumari, R.,presented a paper entitled‘Pitiable condition of women in that long silence’ in theTamil University, Tanjavur this was conducted by Aynthamil Aaivalar Mandram, Madurai on27th May 2010.
  54. Raju, S.,presented a paper entitled“Sugarcane baggasse based activated carbon usingin air pollutants control” in the National Level Virtual Conference on ‘AdvancedTechnologies in Waste Water Treatment.’
  55. Rajesh Kanna, R., presented a paper entitled “Investigating the Performance ofTransformer by using InsulatingFluids” IEEE InternationalConference on Circuit,Power and ComputingTechnologies (ICCPCT-2014).
  56. Rajesh Kanna, R.,presented a paper entitled “Control of a Three Phase HybridConvertor for a PV Charging StationInternational Conferenceon Innovations inEngineering, Science andTechnology (ICIEST-2019).
  57. Sundararaj, S.,presented a paper entitled“Voltage Regulation in DC-DC Boost Converter By using Hybrid ControlAlgorithm” in the National conference on RTC ’10 held on 11 th& 12 th February 2010 organized by theDepartment of ECE, Annai Mathammal Sheela Engneering College, Namakkal.
  58. Sundararaj, S.,presented a paper entitled“Artificial Neutral Network based Load and Forecasting with Particleswarm optimization ” in the National conference on AIEAIE ’13 held on 28th April 2013 organized by the Department of EEE, Excel college of Engineering and Technology, Namakkal.
  59. Arunachalam, V.,presented a paper entitled“Real Time Object Tracking and its Application License PlateRecognition”, organized by the Institute for Research and Development India (IRD India) onInternational Conference on Electrical Electronics and Computer Science (ICEES), 2012.
  60. Kanagalakshmi, A.,presented a paper entitled“RF Circularly Polarized Patch Antenna for Effective Communication”, NCESCES’14,February 2014, CIT, Coimbatore.
  61. Kanagalakshmi, A.,presented a paper entitled“Sensing Vulnerabilities and Multiple Spoofing Adversaries in Wireless LAN”, ICET-2015, 25th January 2015, IFERP.
  62. Kanagalakshmi, A.,presented a paper entitled “Design of Low Cost Microstrip Antennas for Wireless Sensor Networks”, ETVCE’16,19th February 2016, Sree Sastha Institute of Engineering and Technology, Chennai.
  63. Kanagalakshmi, A., presented a paper entitled Spectrum Utilization in Cognitive Radio Networks Using Probability DistributionAlgorithm” NCCC’16, 9th March 2016, SRM University, Chennai.
  64. NiyasAhamed, A., presented a paper entitled “A Robust Schema For Location Conscious Routing inMANET” International Conference on Emerging Trends in Engineering &Technology (ICETET’ 14).
  65. NiyasAhamed, A., presented a paper entitled “ A Robust Schema For Location Conscious Routing inMANET”, International Conference on Recent Trends in Engineering & Technology(ICRTET’ 14).
  66. Saravanaselvi, P., presented a paper entitled International Conference on Innovative Research in Electrical Sciences (20.06.2016 to21.06.2016).
  67. Shanmugapriya, G., presented a paper entitled “Automatic Ration Material Distribution based on GSM and RFIDTechnology” on National Conference on Recent Trends and Challenges in EngineeringResearch, April 2016.
  68. Shanmugapriya, G., presented a paper entitled “Analysis of Video Saliency Mapping for Object Detection UsingDeep Learning RBFNN Networks” on International Conference on Modern Trends inEngineering & Research, March 2020.
  69. Shanmugapriya, G., presented a paper entitled, “Performance Comparison of deep learning classifiers for diabeticRetinopathy Identification” on International Conference on Modern Trends in Engineering &Research, March 2020.
  70. Shanmugapriya, G., presented a paper entitled, “Power Allocation and Gabor filter based multi user MIMO systemsusing Secure LED Communication for Non-Orthogonal access” on International Conference onModern Trends in Engineering & Research, March 2020.
  71. Shanmugapriya, G., presented a paper entitled, “Women safety System Using IOT” on International Conference inEmerging Trends in Engineering and Technology Research, April 2021.
  72. Suganthi, M., presented and published the paper entitled “Recent Advances in Color Image De-Hazing Using Structural and Statistical Features” in the two day international conference onResearch Technology of Embedded System in Computer Science organized by Idhaya College for women,Kumbakonam held on Feb. 03rd & 04th 2020.
  73. Suganthi, M., presented and published the paper entitled “A Survey: Fast And Recent Advances In SingleColor Image Dehazing Using Structural And Statistical Features” in theNational Conference on recent trends in Engineering and Technology on 14th Feb. 2020, PSN College ofEngineering and Technology, Melathediyoor, Tirunelveli.
  74. Suganthi, M., presented and published the paper entitled “Face Spoofing Detection UsingConvolutional Neural Network Based Feature Extraction” in the Internationalconference on Emerging Trends in Applications of computing on March 06-03-2020, organized byDepartment of Computer Science and Engineering, Francis Xavier Engineering college, at Tirunelveli.
  75. Suganthi, M., presented and published the paper entitled “Single Color Image De-HazingUsing Dark Channel Prior” in the two day national level E-Conference onEmerging Trends in Information Technology held on Feb. 11th & 12th 2021.
  76. Suganthi, M., presented and published the paper entitled “Efficient And Recent AdvancesFor Face Spoofing Detection Using Convolutional NeuralNetwork Based Feature Extraction” in the International Conference onrecent intelligent technology in science, on 26th Feb. 2021, Cheran College ofEngineering, K.Paramathi, Karur.
  77. Suganthi, M., presented and published the paper entitled “A Novel Technique For RandomNumber Generation Using Cmos Image Sensor” in the AICTE sponsoredNational online conference on Data Science and Intelligent Information Technology on14th & 15th May 2021, organized by National Engineering College,K.R.Nagar,Kovilpatti.
  78. Suganthi, M., presented and published the paper entitled “An Application For AgriculturalMarketing System” in the International conference on ITDECC-21 on 17th & 18thMay 2021, organized by SRM Institute of Science & Technology.
  79. Suganthi, M., presented and published the paper entitled “Color Image Forgery DetectionBased On Convolution Neural Network” in the International conferenceon ICCIBME-21 on 28th & 29h May 2021, organized by Panipat Institute of Engineeringand Technology.
  80. Suganthi, M., presented and published the paper entitled “Color Image Finding Mask ByCopy Move Forgery Detection” in the International conference on
  81. ICEAASET-21 on 02 July 2021, organized by Cheran College of Engineering, K.Paramathi, Karur.
  82. Suganthi, M., presented and published the paper entitled “A Survey: Quick and Recent Advance Methods in Single Color Image De-Hazing” in theInternational conference on ICRIETMS-2022 heldon 24th and 25thMAR 2022.
  83. Suganthi, M., presented and published the paper entitled “A Survey: Efficient and Method for Single Image De-Hazing” in the International conference on ICRTMREICT-2022 held on 28 & 29 APR 2022.
  84. Ramnath, M., presented a paper on Latent Semantic analytics Approach to Detect Spam post content in the International conferenceon Emerging Trends in applications of computing (ICTTAC 2020) on March 6th 2020 Organizedby Department of CSE, Francis Xavier Engineering College.
  85. Ramnath, M., presented a paper on Sentimental Analysis using Deep CNN in AICTE sponsored International E-conference onemerging Trends in Engineering and Management(ICETEM 2020) held on 19th and 20thFebruary.
  86. Ponsundari, S., presented a paper on National level conference on “Advanced Image Processing and Networking” Sponsored byCouncil of Scientific and Industrial research (CSIR), Organized by National EngineeringCollege, Kovilpatti, March 2013.
  87. Sulochana, S., (2019), “An Affordable Ecological Age Booking Considering Air Profanation Control by Producing Electricity”, “National  conference  on Innovative Technologies in Engineering”, Dr.G.U.POPE College ofEngineering.
  88. Sulochana, S., (2019),  “A  Clever  System  of   Providing   outpass   using Android Application”, “National conference on recent trends in VLSI, Communication & Embedded Technologies”, Dr.SivanthiAditanar College of Engineering.
  89. Subburajan, M., Selvavignesh, M., Sulochana, S., (2018), “Smart WalkingStick for Blind Person”, “National conference on recenttrends in VLSI, Communication & Embedded Technologies”, Dr.SivanthiAditanar College of Engineering,Tiruchendur.
  90. Sulochana, S., Nishanthini, S., Muthu Selvam, S., Patchairajakani, P., Nisha Golda, P., (2017), “Power Generation using Piezo Electric & Heat sensorsusingMicrocontroller”,  “National          conference       on      Engineering     & Applications”, Universal College ofEngineering.
  91. Sulochana, S., Sakthi, G., (2015),“Implementationofaliasingfreedigitalpulsewidth modulaton in ADC”, “International conference on Networks, Electronics communication & Control”, CAPE Institute of Technology, Levengi Puram.
  92. Sulochana, S.,Sakthi, G., (2015),“Design&lmplementationofaliasingfreedigital PWM in ADC”,”National conference on recent trends in Communication& Information Technology”, Knowledge Institute ofTechnology.
  93. Angel Rose, T., Sulochana, S., (2012), “Detection of ventricular  ectopic  beat in Non -invasive fetal ECG extraction”, “International Conference of Modeling optimized and computing for higher education”, Noorul Islam Center for Higher Education.
  94. Sulochana, S., (2012), “Level set approach to segmentation  and  bias correction of MRI images with intensity homegenity”, “National Conf in Innovative techniques in Power Engg& drives” in Vellammal College ofEngineeringg.
  95. Sulochana, S., Nirmal Singh, N., Jacob Wilfred, P., (2011), “Reduction of residual Noise by time frequency block thresholding”, “SUNllST”, Sun college ofEngineering.
  96. S.PrasanthKitchley, D.Ravindran and A. noorulHaq, “ Hybrid Algorithm for flow shop Problems” National Conference on Global Technologies in Manufacturing and Thermal Sciences (GTMTS -2004) organized by Sethu Institute of Technology Pulloor, Kariapatti, 9th and 10th July 2004.
  97. S.Rajakumar and D.Ravindran, “ Aerodynamic Analysis of different NACA4 Series Airfoils” International conference on Recent advances in Mechanical Engineering (ICRAME 2010) organized by Department of Mechanical Engineering, Noorul Islam University, Kumarcoil  8th and 9th April 2010.
  98. D.Ravindran , T.M.ChentilJegan and Dr, M,Dev. Anand, Determination of EDM Machining Parameters in AISI202 stainless steel using Grey Relational Analysis” International Conference on Modeling Optimization and Computing, Noorul Islam Centre for Higher Education (NICHE) Kumracoil  Tamilnadu India on 10th and 11th Aril 2012.
  99. S.Sudhagar, D.Ravindran and A. NoorulHaq, “ Minimizing the total tardiness in flow shop problems using memetic Algorithm” National Conference on Global Technologies in Manufacturing and Thermal Sciences (GTMTS -2004) organized by Sethu Institute of Technology Pulloor, Kariapatti, 9th and 10th July 2004.
  100. Rajkumr S, Ragupathy V.P. and Ravindran D, “ Evaluation of Stiffness of aluminum hexagonal honeycomb Core Sandwich Panels By FE Methods”, 2nd International Conference on Simulation Modeling and Analysis –COSMA 2011, 14-16 December 2011. Organized by Amritha School of Engineering, Coimbatore.
  101. S.Rajkumr, D.Ravindran , K.Arulraj and K.PramodShettty, “ Experimental Investigation of Stiffness characteristics of Tee Joints of aluminum Honeycomb core sandwich panels with different edging configurations”, International conference on Application s and design in Mechanical Engineering 2012 ( ICADME 2012)27-28 Feburary 2012, Penang,Malaysia.
  102. S.Rajkumar, D. Ravindran and V.P. Raghupathy,  “ short Beam testing on Adhesive Butt Joints for Aluminum Hexagonal Core Sandwich Panels with Different edging Configurations” Proceeding of the Conference on Advances in Mechanical Engineering  2012  ,AMAE, Gurgon, Indi 28th -29th December 2012.
  103. Participated and successfully completed the online workshop on Universal Value on the Theme “Inculcating Universal Human Values in Technical Education during 5th to 9th October, 2020 organized by All India Council for Technical Education (AICTE)